除湿机翅片结冰了怎么办？

除湿机翅片结冰了怎么办？

除湿机现在已经逐渐在大众人群中普及了，在北方的冬季和南方的梅雨季节除湿机是人们经常用于家庭和工厂除湿的设备。然而在一些寒冷的时候，除湿机会经常结冰，影响使用。那么除湿机结冰的原理和解决措施是什么呢？小编在这里给大家讲下吧。

Dehumidifier is now gradually popular in the public, in the winter of the north and the plum rain season in the south, dehumidifier is often used for household and factory dehumidification equipment. However, in some cold times, dehumidifier often freezes, affecting the use. So what is the principle and solution of dehumidifier icing? Let's talk about it here.

在使用除湿机的时候难免会遇到这样那样的问题以及故障，那么大家在使用除湿机时遇到除湿机两器结霜结冰的情况，应该如何处理呢，我们一起来看一下。

When using the dehumidifier, it is inevitable to encounter such and other problems and failures. Then, when using the dehumidifier, we encounter the situation of frosting and icing on the two dehumidifiers. How to deal with them? Let's have a look.

在正常的使用情况，除湿机有结霜现象是正常的，特别是在低温下使用时，更是种常见的现象，当除湿机两器上结霜过多时，会降低除湿效果，所以现在除湿机都配有自动电子化霜功能，当进入化霜程序时，压缩机是不启动的，只有风机在转，所以没有除湿效果，也很省电，就相当于一个风扇在转。待化霜结整后，除湿机恢复工作，这个过程大根需要十几分钟到半个小时左右。所以当在冷库内使用时，由于室内温度过低，除湿机就特别容易结霜甚至结冰，这就使除湿机的化霜时间增加，除湿时间减少，除湿的效果受到影响。

In normal use, it is normal for the dehumidifier to have frosting, especially when it is used at low temperature. When there is too much frost on the two dehumidifiers, the dehumidification effect will be reduced. Therefore, the dehumidifiers are equipped with automatic electronic defrosting function. When entering the defrosting program, the compressor does not start, only the fan is running, so there is no dehumidification effect, It also saves electricity, which is equivalent to a fan running. After defrosting, the dehumidifier will return to work. This process takes about ten minutes to half an hour. Therefore, when it is used in the cold storage, the dehumidifier is particularly prone to frosting or even icing due to the low indoor temperature, which will increase the defrosting time of the dehumidifier, reduce the dehumidification time, and affect the dehumidification effect.

所以当我们遇到除湿机翅片结冰时应先确认下机器是不是有自动化霜功能，现在一般的除湿机都有这个功能，结冰原因有三，1、温度传感器坏了。出现这种情况时，自动化霜功能就会失效。第二，压缩机露弗了，出现这种情况也会使翅片结冰。第三，室内的温度是不是过低，如果在低温下使用如冷库内，就算机器都正常，由于室内温度过低使用不了多长时间也会出现这种情况。所以你可以根据这几种原因来排除倒底问题出在哪了。

Therefore, when we encounter the dehumidifier fin freezing, we should first confirm whether the machine has automatic frost function. Now the general dehumidifier has this function. There are three reasons for freezing: 1. The temperature sensor is broken. When this happens, the automatic frost function will fail. Second, the compressor luff, this situation will also make the fins freeze. Third, whether the indoor temperature is too low. If it is used at low temperature, such as in the cold storage, even if the machines are normal, because the indoor temperature is too low, it will not be used for long. So you can rule out the bottom problem according to these reasons.